BF-30A Sulfur Content of Dark Petroleum Products Tester (Tubular Furnace Method)

Sulfur content tester; Automatically; North Dalian; GB/T 387 ASTM D1551.

BF-30A   Sulfur Content of Dark Petroleum ProductsTester(Tubular Furnace Method)        

  1. Performance and Characteristics

Two tubes; single chip control; automatic temperature control; automatic timing; automatic control of the speed of the oven movement.

  2. Technical Parameters

Working power	AC 220V±10%  50HZ
Input power	≤2000W
Temperature control range	900°C~950°C
Temperature control accuracy	±1°C
Speed of flow meter	60~600ml/min
Thermocouple	K-type
Moving distance of furnace	150mm
Time of movement	30min, 35min, 40min, 45min, 50min, 55min, 60min (optional)

  3. Applicable Standard

This instrument conforms to the standard of GB/T 387, ASTM D1551.

  4. Scope

This instrument applies to the dark petroleum products that have sulfur content above 0.1% (m/m), such as lubricating oil, heavy-mass petroleum products, crude oil, petroleum coke, paraffin and sulfuric additives.

  5. Structural Characteristics

This instrument is controlled by the single chip, and is capable of controlling the furnace temperature, the speed of furnace and the baking time automatically. The LCD display the time, baking time, set temperature and measured temperature of the furnace, and the location of furnace car. This instrument consists mainly of tubular furnace system, single chip control system, air purification system, air flow control system, etc. Two parallel quartz tubes with siphons can test a blank sample and a test oil sample at the same time. Three air washing bottles used to purify the air have a capacity of not less than 250ml.

BF-30A Sulfur Content of Dark Petroleum Products Tester (Tubular Furnace Method)